P2714 Fault Code

Pressure Control Solenoid D Performance/Stuck Off

• What does that mean?
• Symptoms
• Causes
• Solutions

The P2714 fault code indicates issues with the Pressure Control Solenoid D, which is responsible for controlling the hydraulic pressure in the transmission. When this solenoid is stuck off or exhibits poor performance, it can lead to shifting issues and overall transmission malfunction.

What are the symptoms of the P2714 code?

• Erratic or harsh shifting in the transmission
• Delay in engagement when shifting from park to drive or reverse
• Transmission overheating due to improper pressure regulation
• Illuminated check engine light on the dashboard
• Poor acceleration performance of the vehicle.

What causes the P2714 code?

• Faulty Pressure Control Solenoid D
• Electrical short or open circuit in the solenoid
• Fluid contamination or low transmission fluid level
• Wiring issues or damaged connectors in the transmission harness
• Internal transmission failure or mechanical issues.

How to fix P2714?

• Inspect and replace the Pressure Control Solenoid D if faulty
• Check and repair any wiring issues or damaged connectors
• Verify transmission fluid level and condition; change if contaminated
• Clear any diagnostic trouble codes and conduct a test drive to confirm the fix
• If problems persist, consider having the transmission inspected for internal damage.