P2809 Fault Code

Pressure Control Solenoid G Stuck On

• What does that mean?
• Symptoms
• Causes
• Solutions

• The P2809 code indicates a fault with the Pressure Control Solenoid G, which is responsible for regulating fluid pressure in the transmission.
• This solenoid is crucial for optimal shifting and overall transmission performance, as it influences how the transmission fluid flows within the system.
• A stuck-on condition means the solenoid is preventing the fluid from shifting properly, which can lead to various issues in the vehicle's transmission operation.

What are the symptoms of the P2809 code?

• Symptoms associated with a P2809 code may include:
  • Harsh or erratic shifting that feels abnormal compared to the vehicle's usual performance.
  • The transmission may go into 'limp' mode, which limits speed and performance to protect the vehicle.
  • Transmission overheating due to improper fluid flow.
  • Unusual noises from the transmission area, such as grinding or kicking during shifts.

What causes the P2809 code?

• Common causes for the P2809 code include:
  • A defective Pressure Control Solenoid G that fails to respond appropriately.
  • Wiring or connection issues, such as damaged wires or poor connections that disrupt the solenoid's signal.
  • Low transmission fluid levels or contamination that could affect solenoid operation.
  • Problems with the transmission control module (TCM) that may incorrectly control the solenoid.

How to fix P2809?

• To resolve a P2809 issue, the following steps may be necessary:
  • Inspect the wiring and connectors associated with the Pressure Control Solenoid G for any damage or corrosion, and repair as needed.
  • Check and top up the transmission fluid to ensure the levels are adequate.
  • Replace the faulty Pressure Control Solenoid G if it is found to be defective.
  • Clear the fault code from the vehicle’s computer and take the vehicle for a test drive to confirm the issue is resolved.